Our Services

Every weekly maintenance visit from Max Pools Austin covers the same core routine regardless of pool size or neighborhood: full surface skimming and debris removal, brushing the walls and floor, vacuuming as needed, testing and balancing water chemistry (pH, chlorine, alkalinity, and calcium hardness), cleaning the skimmer and pump baskets, and a visual inspection of the equipment pad. If anything looks off during that inspection, a slow leak at a union fitting, a pump starting to run louder than normal, a salt cell reading lower than expected, you hear about it the same day rather than finding out weeks later when it has turned into a bigger repair.

Weekly pool maintenance pricing depends on your pool’s size, current condition, and the equipment installed, since a small builder-grade pool and a larger custom system with a spa or water feature do not take the same time or products to service correctly. Rather than quoting a generic number over the phone, Max Pools Austin sets pricing after a free on-site inspection so the number reflects your actual pool, not an average. There is no long-term contract required to start weekly service, and pricing is always confirmed before the first visit, never guessed.

No. Max Pools Austin does not lock maintenance clients into long-term contracts. The business earns repeat clients by showing up consistently and doing the work right, not by requiring a multi-year commitment upfront. You can start weekly service, see how the account is handled, and continue as long as it makes sense for your pool and your schedule.

Most repair calls in the Austin area get an on-site inspection the same day or the next business day, depending on when the call comes in and where the property sits on the route. Because the client list is kept deliberately small, repair scheduling is not backed up the way it often is with larger companies juggling a much bigger book of business. During the on-site visit, the actual failure point is diagnosed before any fix is recommended, so you get a clear answer on what is wrong and what it will take to correct it, not a guess.

The team handles the full range of common pool repair needs across the Austin metro: pump repair and replacement, filter cleaning, repair, and replacement, pool heater repair, tile and waterline tile replacement, plaster repair and spot patching, leak detection and repair, and general equipment and automation troubleshooting. Whether the issue is a pump that has started running loud, a green or cloudy pool that will not clear with normal chemicals, a slow water-level drop that suggests a leak, or a heater that has stopped keeping up, the same diagnosis-first approach applies: find the actual cause before recommending a fix.

The team is certified to service Fluidra, Hayward, Jandy, Waterway, and Zodiac equipment, along with National Pool Tile products, which covers the large majority of pumps, filters, heaters, salt systems, and automation controllers found on pools across the Austin area and Texas Hill Country. Jandy, Zodiac, and Fluidra are the same manufacturer sold under different names, so certification across that family alone covers a wide share of local installations, and the crew stays current on variable-speed pump and salt-chlorination systems as those become the default on newer builds.

Yes, but new construction and major renovations are offered only to existing maintenance clients, on purpose. Once you are on a weekly maintenance plan, Max already knows your property, your equipment, and how your family actually uses the backyard by the time a construction conversation starts, which is what keeps the build referral-based and boutique instead of a high-volume operation juggling several unrelated projects at once. Max takes on one major construction or renovation project at a time so that build gets his full, direct attention from the first walkthrough to the final punch list.

New pool construction is reserved for homeowners who are already receiving weekly maintenance or repair service from Max Pools Austin. If you are not yet a client, the way in is to start with weekly maintenance or a repair project; once that relationship is established, you become eligible to request a construction or renovation quote. This is a deliberate choice rather than a capacity limitation, a build is one of the largest investments a homeowner makes in a backyard, and Max prefers to already know the property and the people before taking that project on.

The most common sign of a pool leak is water level dropping noticeably faster than evaporation alone would explain, evaporation typically accounts for roughly a quarter to half an inch of water loss per week in Central Texas heat, so anything beyond that is worth investigating. Other warning signs include a pump that keeps losing prime, air bubbling out of return jets, unexplained wet spots or soggy ground near the equipment pad or pool shell, and a chemical demand that never seems to stabilize no matter how often the water is balanced. A professional leak detection visit narrows down whether the loss is coming from the shell, the plumbing, or the equipment before any repair is recommended, since guessing at the source usually wastes money on the wrong fix.

A green pool almost always means an algae bloom has taken hold, usually because chlorine levels dropped too low for too long, filtration was not running enough hours per day, or water chemistry drifted out of balance during a stretch of hot weather. Cloudy but not fully green water is often an early sign of the same problem, or can point to poor filtration, high calcium hardness, or a pH and alkalinity imbalance. In Austin’s long, hot summers, this can happen surprisingly fast, a pool that looked fine on a Monday visit can show visible algae by Thursday if a filter is losing efficiency or a chlorinator is under-dosing, which is the core argument for consistent weekly service rather than reactive, as-needed visits once a problem is already visible.

Weekly service is the standard recommendation for most Austin-area pools, because long stretches of 100-degree days from June through September accelerate chlorine burn-off and algae growth far faster than in milder climates. A pool that sits untouched for even a week or two during peak summer heat can go from clear to green quickly, and pollen season in spring adds its own filtration demand well before the hottest months arrive. Even through the milder winter months, when pool use and algae risk both drop, equipment checks still matter, since an unexpected freeze can damage un-winterized pumps and heaters in a single cold snap.

A variable-speed pump adjusts its motor speed to match what the pool actually needs at a given moment, running slower for routine filtration and ramping up only when higher flow is needed, which uses significantly less electricity than a traditional single-speed pump running at full power around the clock. These pumps are increasingly the default on newer Austin-area builds and are typically paired with digital automation controls. Max Pools Austin is certified on the major variable-speed and automation lines from Fluidra, Hayward, Jandy, Waterway, and Zodiac, so both routine maintenance and troubleshooting cover these newer systems as well as older, simpler single-speed setups.

Yes. Max Pools Austin is an owner-led, family-owned pool service company based in the Austin, TX area, and it runs like the mom-and-pop shop it is. Owner Maxwell Conklin has worked in pools since he was a teenager and started the company on the idea of keeping the client list small enough that every account gets his direct, personal oversight, whether he or a trained member of his crew is the one on-site for a given visit. That local, owner-involved structure is also why the same technician tends to show up account to account instead of a rotating cast of unfamiliar faces.

Call or text Max Pools Austin directly and describe what you need, weekly maintenance, a repair, or a larger project if you are already a client, and you will typically hear back within minutes. From there, Max comes out for a free, no-obligation on-site inspection, looks at the pool in person, and gives a straight answer on the spot when possible: if something is a quick fix, he tells you; if it needs more, you get an honest estimate before any work starts. There is no pressure and no sales pitch built into that first visit, it exists purely to get you an accurate answer based on your actual pool.